|
|
|
|
|
|
Measurements
- 1 inch (1") = 2.54cm.
- The given sizes are approximations only, exact measurements may vary.
- The items label may not match the advertised size, Asian labeling can be non-standard and we will often market an item according to European standards.
- To compare sizes take a similar item of your own that fits well and lay it flat, smooth it out and make sure it is buttoned or zipped if applicable. Use a tape measure to measure straight across, making sure the tape measure is tight.
- You may need to leave extra room for bulky items or for movement.
- We generally use the bust measurement to assess a shirts advertised size, but please check all measurements as Asian clothing sometimes does not conform to European norms.
- BAck height is from the highest point on the shoulder (not including collar if applicable) to the bottom hem.
- SLeeve length is from the top edge of the shoulder (normally at the seam) to the end of the arm.
- Yoke is from the top edge of each shoulder (normally at the seam) across the top of the shoulders and back of the neck. The Yoke is not straight across the shirt, it rises up at the back of the neck, passing the prominent neck bone.
- A common way of measuring sleeve length is from the prominent neck bone, across the shoulder and down to the end of the arm. This can be calculated from our measurements by adding half the Yoke to the SLeeve length.
- Bust, Waist, Hip, Shoulder, and Arm measurements are obtained by measuring once across and then doubling this measurement.
|
Bust/chest: 26"
Waist: n/a"
Hip: n/a"
Shoulder: n/a"
Arm: n/a"
Yoke: n/a"
SLeeve length: "
BAck height: n/a"
Collar: n/a"
|
|
|
|
|
| |
